TOOL TALK SATURDAY
19,221 members · Hobbies Groups · Created March 2019
IT'S ALWAYS SATURDAY IN TOOL LANDUSA Tools: madeinusatools.com/ toolbarn.com/usa-made-tools/ protoolreviews.com/what-tools-are-made-in-the-usa/ bondhus.com sktools.com hosecraftusa.com eaglegripusa.com estwing.com rlspellmanmfg.com
Join the TOOL TALK SATURDAY group on Gab
Recent discussion in TOOL TALK SATURDAY
- @Shardik1 — Michael Anderson Owes $14,000 to the Snap-On truck 👇
- @Shardik1 — Post by @Shardik1
- @gbkthaddock — Government Regulations Now Add $132,000 to the Average New Home https://www.theburningplatform.com/2026/09/04/government-regulations-now-add-132000-to-the-aver…
- @Anarchy4u — 2.4 ecotech Customer changed the head and timing chain. Runs but not good. Drove it 22 miles to me in limp mode. If you can tell what they did wrong just by th…
- @LBL — Need some SERIOUS Pliars, for Forming 1/8 inch steel rod. Medium Size Channel lock would be OK - if they were straight. 10" Straight Locking/ Vise Grip Pliars …
- @Goon7 — Post by @Goon7
- @AEvinger — Ignition coil lost it's nut causing check engine light to flash. Since the ignition coil was now loose, there was inconsistent or no spark for that cylinder ca…
- @Anarchy4u — This 45 min fan clutch job turned into 4 hrs because i busted the radiator. #workingforfree #losingmoney
- @Sicilianswitchblade — Replaced hose from air box to turbocharger on the sprinter. Discovered while poking around after the injector seal job. Stealership wanted $400.00 for a plasti…
- @Sicilianswitchblade — Leaking injector seal in the sprinter replaced today. Common failure point in the mercedes diesel engines especially around 200K Mi. One puny hold down bolt th…
